Simple High Power 7000W Induction Heater 12v DC with IRFP260N

 

Simple High Power 7000W Induction Heater 12v DC with IRFP260N

Induction Heater: Planning a high-power 1200W enlistment heater utilizing the IRFP260N MOSFET with a 30V DC input requires careful consideration about hardware, parts, and protection measures. Here is an itemized manual to complete this.

7000W Induction Heater: If you want to make a 7000W Induction Heater, you will need to use a lot of MOSFET and Cooling fans and set the in a PCB design. For that DC Power Supply 60-90V 60-80A should be used.

COMPONENT SELECTION:

1. IRFP MOSFET: This MOSFET can handle with high power and voltage, reasonable for the recruitment warmer's requisites.

Data Sheet: Mosfet IRF260N, Type of Control N channel, Maximum Power 300W, Maximum Drain Source Voltage 200V, Gate 20V Max, Drain Current Maximum  50A, Temperature 175 ‘C .

2.Power Supply: Select a power supply fit for conveying no less than 30A at 40V DC to meet the 1200W power requirement.

3.HeatSink and Cooling: Choose a reasonable heatSink and cooling fan for the MOSFET. Can keep the MOSFET cool when the MOSFET gets hot.

4.Capacitor Orginal High Quwality: Likely 0.68uf/275V or similar 0.47uf/250v 0.10uf/250v 0.24uf/250v

5.Tproidal Coil: Most Impotant toroidal coil 60-100uh x 2 (Copper wire 19 swg , 1.2 Inch toroidal ring , 50-60 Turns

6.Resistor 10k/.25w x 2 & 470 Ohm/2w

7.Zener Diode 12v 5w x 2 or Similar 12v 1-5w

8.Diode 4007N x 2

Safety Warning:

Practice awareness while working with high voltages and flows. Use suitable security stuff and protection. Consolidate warm declaration system to forestall part overheating. Plan the circuit with maintain highlights to alleviate the dangers of electrical risks. Test the circuit completely before full-power activity and carry out disaster closure systems, if fundamental.

Compliance and system:

Guarantee consistence with important wellbeing norm and rule for administering high-power electronic gadgets. By following these means and contemplation, you can make a high-power 1200W induction heater utilizing the IRFP260N MOSFET with a 35V DC input, giving effective and solid completing to different temperate applications.

If you want to make this induction heater, use all the high-quality materials; As a result, a high-quality practical induction heater will be produced. This tutorial is perfect for any electronics enthusiast who wants to build their own induction heater. So, let's get started and build your own DIY 1200W Induction Heater!